[1]王雨时.解决23 mm航炮榴弹引信炮口炸问题的技术途径[J].ag亚游ag8|官方,2007,(05):6.
　WANG Yu-shi.Technical Scheme to Solve Muzzle Burst Problem of Fuze for 23 mm Caliber Aircraft Cannon HE Projectile[J].,2007,(05):6.
点击复制

解决23 mm航炮榴弹引信炮口炸问题的技术途径()
分享到：

《ag亚游ag8|官方》[ISSN:1008-1194/CN:61-1316/TJ]

卷:
期数:
2007年05期
页码:
6
栏目:
出版日期:
2007-10-26

文章信息/Info

Title:
Technical Scheme to Solve Muzzle Burst Problem of Fuze for 23 mm Caliber Aircraft Cannon HE Projectile
文章编号:
1008-1194(2007)05-0006-03
作者:
王雨时
南京理工大学机械工程学院，江苏 南京 210094
Author(s):
WANG Yu-shi
School of Mechanical Engineering，Nanjing University of Science and Technology，Nanjing 210094，China
关键词:
航空炮弹;?引信;?安全性;?炮口炸;?发射装药;?延期解除保险;?钝感度
Keywords:
aircraft cannon projectile;?fuze;?safety;?muzzle burst;?propellant charge;?delay arming distance;?insensitivity
分类号:
TJ43
文献标志码:
A
摘要:
为了寻求23 mm航炮榴弹引信炮口炸的原因，分析了23 mm航炮榴弹及其引信、发射装药与内弹道的特性，讨论了23 mm航炮榴弹的安全距离，估算了发射药残渣的飞行特性。发射装药在膛内不能完全燃烧，会有一部分残渣飞出。所配用的弹头触发引信炮口保险距离短，灵敏度高，连发射击时引信在炮口附近撞上此前某一发的发射装药残渣，就会引起炮口炸。解决的技术途径主要有：改进发射装药设计使其在膛内燃烧完、延长引信延期解除保险距离和改善引信钝感度性能。
Abstract:
In order to seek the reason why the fuze of the 23 mm caliber aircraft cannon projectile have a burst out of the muzzle, the performance of the 23 mm caliber aircraft cannon HE projectile and its fuze,the propellant charge and the interior ballistics are analyzed, the safe distance of the 23 mm caliber aircraft cannon HE projectile is discussed,the flight characteristics of propellant fouling out of the muzzle are estimated.The propellant charge cannot burn completely in the chamber;there will be some residue flying off.Because the muzzle safe distance of the point detonating fuze is shorter and the sensitivity of the point detonating fuze is higher,the fuze can cause burst after hitting some propellant fouling nearby the muzzle when automatic firing.The technical schemes to solve this problem mainly are:improving propellant charge design and making it burnout in the chamber, extending delay arming distance of fuze and reforming insensitivity performance of fuze.

参考文献/References:

［1］王尔林,马介飞.232榴弹炮口炸及瞎火原因分析［J］.沈工科技,1980,(5):23-47.
［2］炮弹火箭弹手册（第一分册）［M］.北京:兵器工业部第三管理局,1984.
［3］侯正礼,郁作民.引信手册（第二册）［M］.北京:兵器工业部三局.1984.
［4］邓锦城,蓝德.航空弹药装备手册［M］.北京:中国人民解放军空军司令部、后勤部、装备技术部,1993.
［5］王连荣,张佩勤.火炮内弹道计算手册［M］.北京:国防工业出版社,1987.
［6］马福球,陈运生,朵英贤.火炮与自动武器［M］.北京:北京理工大学出版社,2003.
［7］王泽山,何卫东,徐复铭.火药装药设计原理与技术［M］.北京:北京理工大学出版社,2006.
［8］李昼堂.火药与内弹道［M］.北京:兵器工业出版社,2001.
［9］王雨时.炮弹引信炮口保险性能指标分析［J］.ag亚游ag8|官方,2000,22(3):11-18.
［10］王雨时.以标准大气取代炮兵标准气象条件计算外弹道［J］.沈阳工业学院学报,1990,(1):85-101.
［11］王雨时,张德智,曹纯柱.触发引信防雨试验的等效靶板模拟［J］.沈阳工业学院学报,1994,(1):27-37.
［12］［s.n.］.俄罗斯武器装备概览(第七卷).弹药［M］.马晴,周增瑚,译.北京:总装备部内部资料室,1998.

相似文献/References:

[1]马宝华.现代引信的控制功能及特征[J].ag亚游ag8|官方,2008,(01):1.
　MA Bao-hua.Control Function and Characteristics of Mordern Fuzes[J].,2008,(05):1.
[2]岳明凯,金 浩,魏永合,等.基于标准建模语言的引信工艺参数管理系统[J].ag亚游ag8|官方,2008,(01):11.
　YUE Ming-kai,JIN Hao,WEI Yong-he,et al.Analysis of the Process Parameter Management System for Fuze Based on UML[J].,2008,(05):11.
[3]高 杨,赵 翔,赵兴海,等.激光起爆引信及其关键技术[J].ag亚游ag8|官方,2008,(01):18.
　GAO Yang,ZHAO Xiang,ZHAO Xing-hai,et al.Laser Initiation Fuze and Its Crucial Technologies[J].,2008,(05):18.
[4]罗锦宏,黄汉琛,任光亮.非线性调频引信[J].ag亚游ag8|官方,2008,(01):25.
　LUO Jin-hong,HUANG Han-chen,REN Guang-liang.Non-linear Frequency-modulated Fuze System[J].,2008,(05):25.
[5]石庚辰,李 华.引信MEMS安全系统研究[J].ag亚游ag8|官方,2007,(06):1.
　SHI Geng-chen,LI Hua.Study on MEMS Safety and Arming Device of Fuze[J].,2007,(05):1.
[6]陈双宾,康兴国,李蓉.斜侵彻条件下刚性弹丸轨迹的一种实时计算方法[J].ag亚游ag8|官方,2007,(05):13.
　CHEN Shuang-bin,KANG Xing-guo,LI Rong.A Real-time Algorithm for the Penetration Trajectory of Rigid Projectile Oblique[J].,2007,(05):13.
[7]冯鹏洲,朱继南,吴志亮.美国典型MEMS引信安全保险装置分析[J].ag亚游ag8|官方,2007,(05):26.
　FENG Peng-zhou,ZHU Ji-nan,WU Zhi-liang.Analysis of US Typical MEMS Fuze Safety & Arming Device[J].,2007,(05):26.
[8]石庚辰,李华.引信MEMS机构结构特点研究[J].ag亚游ag8|官方,2007,(05):1.
　SHI Geng-chen,LI Hua.Reasearch on the Structure Characteristics of MEMS Fuze Mechanism[J].,2007,(05):1.
[9]揭涛,施坤林.旋转稳定弹弹道修正引信减旋装置研究[J].ag亚游ag8|官方,2007,(05):9.
　JIE Tao,SHI Kun-lin.Study on Despining Device of Course Correction Fuze for Spin stabilized Projectile[J].,2007,(05):9.
[10]陆静,李太梅,王炅.引信零件仿真过程的客户化开发技术研究[J].ag亚游ag8|官方,2007,(05):17.
　LU Jing,LI Tai-mei,WANG Jiong.Customization Research on Fuze Parts’Simulation Process[J].,2007,(05):17.

备注/Memo

备注/Memo:
收稿日期：2006-11-18??? 修回日期： 2007-02-13
作者简介：王雨时(1962-)，男，辽宁本溪人，教授，国务院政府特殊津贴获得者，研究方向：引信系统分析与设计、弹药安全系统与爆炸序列设计、引信机构动力学。
更新日期/Last Update: 2008-04-25